background image

 

Features 

Description 

 

Frequency Band 

 

GSM/GPRS: 900/1800 

LTE B1/3/8/20/28 

 

Max. TX power 

31 dBm for GSM/GPRS 900 

30 dBmfor GSM/GPRS 1800 

24dBm for LTE B1/3/8/20/28 

 

 

List of the Followed Test Standards for Assessment of RED Requirement 

Hereby, Emerson Digital Cold Chain, Inc. declares that the radio equipment NNT-TG05 is in compliance with 
Directive 2014/53/EU.     

The full text of the EU declaration of conformity is available at the following internet address: 

https://europa.eu/youreurope/business/product-requirements/compliance/technical-documentation-
conformity/index_en.htm

 

NNT-TG05

 complies with the essential requirements of Article 3 of the RED 2014/53/EU Directive, if used for its 

intended use and that the following standards have been applied: 
 

1.

 

Health (Article 3.1(a) of the RE Directive) 

Applied Standard(s):   

 

 

EN 62311:2020 

 

EN 50665:2017 

2.

 

Safety (Article 3.1(a) of the RE Directive) 

Applied Standard(s):    

 

EN 62368-1:2020/A11:2020 

3.

 

Electromagnetic compatibility (Article 3.1 (b) of the RE Directive) 

Applied Standard(s):    

 

ETSI EN 301 489-1 V2.3.3 

 

ETSI EN 301 489-52 V1.2.1 

4.

 

Radiofrequency spectrum usage (Article 3.2 of the RE Directive) 

Applied Standard(s):  

 

ETSI EN 301 511 V12.5.1 

 

ETSI EN 301 908-13 V13.1.1 

 

ETSI EN 301 908-1 V15.1.1 

 

The technical documentation relevant to the above equipment will be held at Emerson. 

 

FCC Regulations: 

According to the definition of mobile and fixed device is described in Part 2.1091(b), this device is a 

Summary of Contents for NNT-TG05










Reviews: