background image

36

At the selected “TIMER ON” time the system will turn on automatically to the last

function selected, either Tuner or CD.

It will play until it reaches the selected ‘Off’ time and then shut off automatically.

Note

:

If the system turns on to CD function it will only play until the end of the disc and

then stop.

If you programmed the system to turn on and play for 3 hours before shutting off,

but your CD is only 45 minutes, the system will only play for 45 minutes but the

power will remain On for another  2 hours and 15 minutes before shutting Off

automatically.

To Deactivate or Activate Timer (On Front Panel Only)

Press the 

TIMER

 button on front panel to activate or deactivate the Timer function.

SNOOZE Button (On Front Panel Only)

After the system turns on at the selected “TIMER ON” time, you may press the

SNOOZE

 button on front panel for a few more minutes sleep.

The 

“ByE ByE”

 briefly appears, then the power turns ‘Off’.

The 

SNOOZE

 indicator appears in the

display.

The sound will stop for approximately 9 minutes and then turns ‘On’ again.

MS3110_112106.p65

22/11/2006, 11:48

36

Summary of Contents for MS3110













































Reviews: