Emerson MONACO CF830GES Owner'S Manual Download Page 15

Page: 15 / 16

U.L. Model No.: CF830

Repair Parts Listing

Key

Model No.

No.

Description

CF830GES00

Hanger Pack, Consisting of:

761655-87

Hanger Bracket (1)

—

Hanger Ball (1)

—

Downrod - 10” (1)

—

Parts Bag Containing:

763973

Pin, Clevis (1)

—

Clip, Hairpin (1)

—

Connector Wire Nut, 12 GA (5)

—

Threaded Stud, #8-32 x 1-1/4” (2)

—

Lockwasher, External Tooth #8 (2)

—

Knurled Knob, #8-32 (2)

—

Screw, Oval Head CR 1/4-20 x 12mm (11)

—

Screw, Oval Head CR #10-32 x 22mm (21)

—

Screw, Pan Head CR #8-32 x 10mm (5)

—

Wrench, Hex 2mm (1)

—

Balancing Kit (1)

—

Cover, Ceiling (1)

763953-GES

Cover, Motor Coupling (1)

763955-GES

Decorative Upper Scroll (1)

763956-GES

Decorative Lower Scroll (1)

763957-GES

Flange Assembly (5 per set)

763963-GES

Flange Medallion Assembly (5 per set)

763965-GES

Blade Assembly (5 per set)

763967

Adapter, Switch Housing (1)

763962

Harness, Wiring (Reverse Switch &

Aux. Capacitor) (1)

763969

Housing, Switch (1)

763970-GES

Nut, Finial (1)

763972-GES

Transmitter, Dual Slide Wall Control (1)

761974-1

Downrod, Short 4.5” (1)

761631-40

—

Owner’s Manual

BP7405

Before discarding packaging material, be certain all parts have been removed.

HOW TO ORDER REPAIR PARTS

WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION:
• PART NUMBER

• PART DESCRIPTION

• NAME OF ITEM

• MODEL NUMBER

The model number of your Fan will be found on a label attached to the top housing.
For repair parts, phone 1-800-654-3545.

Summary of Contents for MONACO CF830GES

















Search results

Summary of Contents for MONACO CF830GES

Reviews:

Related manuals for MONACO CF830GES

Brands by name

Popular brands

Emerson MONACO CF830GES, Owner'S Manual

Search results

Summary of Contents for MONACO CF830GES

Reviews:

Related manuals for MONACO CF830GES

Brands by name

Popular brands