9
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF2000
1.
Use four 10-32 x 3/8” pan head screws and flat
washers (supplied) to secure the flange to the fan
blade (ordered separately) (Figure 11). Repeat for
the remaining four blades.
2.
Use the 10 round recessed holes in the motor hub
marked with "5" and install the five blade
assemblies in accordance with Step 3.
3.
Attach one blade assembly to the motor hub using
two 10-32 x 5/8" oval head screws (supplied)
(Figure 12). Do not tighten completely at this time.
Install four remaining blade assemblies in the same
way. Gently snug all flange screws to the motor hub,
working around the hub in a clockwise sequence.
Next, securely tighten all flange screws, again
working in a clockwise sequence. Failure to follow
this procedure could result in fan wobble. This
completes the blade installation.
4.
Slip the pull chain through the bushing in the switch
housing cover. Position the switch housing cover on
the switch housing and secure using two
8-32 x 3/8” screws (supplied) (Figure 13). Secure
the pendant (supplied) to the pull chain using the
connector (supplied).
Fan Blade Installation
10-32 x 3/8"
PAN HEAD SCREW
FLAT WASHER
FAN BLADE
BLADE
FLANGE
Figure 11
MOTOR
HUB
10-32 x 5/8"
OVAL HEAD SCREW
(2 Per Blade Assembly)
Figure 12
SWITCH
HOUSING
COVER
PULL
CHAIN
8-32 x 3/8"
SCREW
Figure 13
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Co. could result in personal injury
or property damage.
WARNING
!
Summary of Contents for MAUI BAY CF2000AB02
Page 14: ...14 U L Model No CF2000 Notes ...
