Emerson Liebert IntelliSlot IS-RELAY, User Manual

Page: 7 / 8

Jumper Setup
5
4.0 J
UMPER
S
ETUP
The card has five jumpers, P3 through P7, as shown in Figure 2 .
Each jumper connects two pins.
Figure 2 Jumper location and numbering
By default all five jumpers have shunts installed. The two pins are
shunted together to provide the functions shown in Table 2 , allowing
relay commons to be tied together.
NOTE: The jumpers should be removed if there is any external volt-
age source that may intentionally or inadvertently be connected to the
relay.
Removing the shunt from any two pins breaks the connection between
the relay commons so they are not tied together.
Table 2 Jumper connections
Jumper Relay
P6 On Battery
P5 UPS Fault
P4 Low Battery
P3 On Bypass
P7 Summary Alarm
Jumper
P6
Jumper
P5
Jumper
P4
Jumper
P3
Jumper
P7
FRONT OF
CARD