Shipping Splits, Kickplates
31
Liebert
®
e
XL
™
A
PPENDIX
A - S
HIPPING
S
PLITS
, K
ICKPLATES
Figure 18 Shipping split, 625-800kVA Liebert
e
XL single-module UPS
553028P1
Pg. 1, Rev. 5
A
A
B
B
FRONT
FRONT
G
G
H
F
F
EMI Plates (3) {PN: 5533579P1}
M6 Large Flat Washer (6) {PN: 09-43B00Z-00}
M6 Split Lock Washer (6) {PN: 09-36B00Z-00}
M6 X 25 Bolt (6) {PN: 09-02BL0Z-11}
Batt Neg (-) Flex From Input Cabinet
M8 Large Flat Washer (4) {PN: 09-43E00Z-00}
M8 Belleville Washer (8) {PN: 09-39D00Z-A7}
M8 X 40 Bolt (4) {PN: 09-02EL0Z-14}
Torque 20.0 N, (180 in-lb)
Batt Pos (+) Flex from Input Cabinet
M8 Large Flat Washer (4) {PN: 09-43E00Z-00}
M8 Belleville Washer (8) {PN: 09-39D00Z-A7}
M8 X 40 Bolt (4) {PN: 09-02EL0Z-14}
Torque 20.0 N, (180 in-lb)
Ph A - Flex From Input Cabinet
M8 Large Flat Washer (2) {PN: 09-43E00Z-00}
M8 Belleville Washer (4) {PN: 09-39D00Z-A7}
M8 X 40 BOLT (2) {PN: 09-02EL0Z-14}
Torque 20.0 N, (180 in-lb)
Ph B - Flex From Input Cabinet
M8 Large Flat Washer (2) {PN: 09-43E00Z-00}
M8 Belleville Washer (4) {PN: 09-39D00Z-A7}
M8 X 40 Bolt (2) {PN: 09-02EL0Z-14}
Torque 20.0 N, (180 in-lb)
Ph C - Flex From Input Cabinet
M8 Large Flat Washer (2) {PN: 09-43E00Z-00}
M8 Belleville Washer (4) {PN: 09-39D00Z-A7}
M8 X 40 Bolt (2) {PN: 09-02EL0Z-14}
Torque 20.0 N, (180 in-lb)
Ph C - Flex from Bypass Cabinet
M8 Large Flat Washer (2) {PN: 09-43E00Z-00}
M8 Belleville Washer (4) {PN: 09-39D00Z-A7}
M8 X 40 Bolt (2) {PN: 09-02EL0Z-14}
Torque 20.0 N, (180 in-lb)
Ph B - Flex from Bypass Cabinet
M8 Large Flat Washer (2) {PN: 09-43E00Z-00}
M8 Belleville Washer (4) {PN: 09-39D00Z-A7}
M8 X 40 Bolt(2) {PN: 09-02EL0Z-14}
Torque 20.0 N, (180 in-lb)
Ph A - FLEX FROM BYPASS CABINET
M8 LARGE FLAT WASHER (2) {PN: 09-43E00Z-00}
M8 Belleville Washer (4) {PN: 09-39D00Z-A7}
M8 X 40 Bolt (2) {PN: 09-02EL0Z-14}
Torque 20.0 N, (180 in-lb)
Bend flex to 90° position
before pushing the
bypass & core together.
Monitor flex to avoid
pinching between
cabinets/busbars
Cabinet-to-Cabinet Mounting Hardware
M10 Large Flat Washer (1) {PN: 09-43G00Z-00}
M10 Split Lock Washer (1) {PN: 09-36G00Z-00}
M10 X 30 Bolt (1) {PN: 09-02GL0Z-12}
(Typically 12 Places) (Labeled “MH”)
Torque 27.0 Nm (240 in-lb)
Install MH
From Input
Install MH
From Input
Install MH
From Input
Install MH
From Core 2
Install MH
From Core 2
Output C
Output B
Output A
Install MH
From Bypass
Install MH
From Bypass
Install MH
From Bypass
Install MH
From Bypass
Install MH
From Core 1
Install MH
From Core 1
Install MH
From Core 1
Batt +
Batt -
Input Ph A
Input Ph B
Input Ph C
See Detail D
See Detail C
See Detail E
SECTION A-A
SECTION B-B
DETAIL D
DETAIL C
