background image

11

English

Connecting the Antenna, Cable or Satellite

Be sure your Antenna or other Device is connected properly before 
plugging in the AC Power cord.

If connecting to an Antenna through an RF cable

Any DTV programs that are broadcasted in your area can be received 
for free through an antenna connection.

If you connect a Set-top Box through an RF cable

If the TV is connected to a Cable / Satellite Set-top Box via a Coaxial 
connection, set the TV to channel 3/4 or the Channel specified by the 
service provider.

If connecting a Set-top Box through an HDMI cable

If the TV is connected to a Cable / Satellite Set-top Box via an HDMI 
cable, make sure you select the correct Source by using 

SOURCE

.

If connecting a Set-top Box through Component Video Input

If the TV is connected to a Cable / Satellite Set-top box via Component 
Video Input, make sure you select the correct Component Video Source 
by using 

SOURCE

.

Connecting a Set-top Box, Blu-ray disc / DVD Recorder 
via Composite connectors and Analog Audio

Do not place your recorder too close to the screen because some 
recorders can be susceptible to signals.

Plugging in the AC Power cord

Make sure all the necessary connections are made before  the AC 
Power cord is plugged into an AC outlet.

IN

IN

OUT

cable

RF cable

antenna

IN

IN

IN

OUT

antenna

RF cable

Set-top box

RF cable

IN

IN

IN

OUT

RF cable

Set-top box

HDMI cable

IN

OUT

OUT

OUT

IN

IN

IN

IN

IN

OUT

OUT

OUT

Component (Y/Pb/Pr) 

video cables

Audio (L/R) cables

Set-top box

RF cable

Note(s)

• If you have any question about the DTV’s antenna, visit 

www.antennaweb.org

 for 

further information.

• Depending on your antenna system, you may need different types of combiners 

(mixers) or separators (splitters) for HDTV signal. The minimum RF bandpass on 

these devices is 2,000MHz or 2GHz.

• For your safety and to avoid damage to this unit, please unplug the RF coaxial cable 

from the Antenna Input jack before moving the unit.

• If you did use an Antenna to receive Analog TV, it should also work for DTV 

reception. Outdoor or Attic Antennas will be more effective than a Set-top box or 

Inside Antenna.

• To Turn On your reception source easily between Antenna and Cable, install an 

Antenna Selector.

• If you are not receiving a signal from your cable service, contact the Cable provider.

• Only the left loudspeaker reproduces sound for mono equipment. Use a mono to 

stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.

Caution

• Do not connect the AC Power cord to an AC power supply outside the indicated 

voltage of this unit (120V AC).

• Connecting the AC Power cord to a power supply outside of this range may result in 

unit failure, degradation or electrical shock.

Note(s)

• Each time you plug in the AC Power cord, no operations will be performed for several 

seconds. This is not a malfunction.

IN

IN

OUT

OUT

OUT

OUT

OUT

OUT

OUT

IN

IN

IN

OUT

IN

Set-top box

Blu-ray disc/DVD recorder

RF cable

Audio (L/R) + Video cables

Audio (L/R) +

Video cables

RF cable

cable

Continued on next page.

Summary of Contents for LF320EM4






































Reviews: