background image

PACMotion VFD Input/Output Chokes Installation Guide 

Warnings and Cautions 

GFK-3185A 

August 2020 

 

Warnings and Cautions 

ii 

Warnings and Caution Notes as Used in this Publication 

 WARNING 

Warning notices are used in this publication to emphasize that hazardous voltages, currents, temperatures, or other 
conditions that could cause personal injury exist in this equipment or may be associated with its use. 

In situations where inattention could cause either personal injury or damage to equipment, a Warning notice is used. 

 CAUTION 

Caution notices are used where equipment might be damaged if care is not taken. 

 

Note:

 

Notes merely call attention to information that is especially significant to understanding and operating 
the equipment.

 

 

These instructions do not purport to cover all details or variations in equipment, nor to provide for every possible 
contingency to be met during installation, operation, and maintenance. The information is supplied for informational 
purposes only, and Emerson makes no warranty as to the accuracy of the information included herein. Changes, 
modifications, and/or improvements to equipment and specifications are made periodically and these changes may or 
may not be reflected herein. It is understood that Emerson may make changes, modifications, or improvements to the 
equipment referenced herein or to the document itself at any time. This document is intended for trained personnel 
familiar with the Emerson products referenced herein. 

 

Emerson may have patents or pending patent applications covering subject matter in this document. The furnishing of 
this document does not provide any license whatsoever to any of these patents. 

 

Emerson provides the following document and the information included therein as-is and without warranty of any 
kind, expressed or implied, including but not limited to any implied statutory warranty of merchantability or fitness for 
particular purpose. 

 

Summary of Contents for IC866-ICH-006-603-20











Reviews: