15
PROGRAMMED PLAYBACK
You can program up to 20 tracks on a disc to play in any desired order.
NOTE:
You can program a disc either during playback or in Stop mode.
1.) Press the
PROGRAM
button once. The
PROG
indicator and the ‘
0 0
’ flashes in the
display.
2.) Press the
or
button to select the first
track to be programmed.
Example: Track # 02.
3.) When the desired track number is flashing in
the display press the
PROGRAM
button again
to enter the desired track number in Program
Number 1. The track number returns to “
0 0
”.
4.) Repeat Steps 2 and 3 to program additional tracks up to a maximum of 20.
5.) Press the
PLAY/PAUSE
button to begin
programmed playback. The
PROG
indicator
remains in the display and the track display
stops flashing.
• Playback begins with the first track you programmed and continues until all
programmed tracks have been played, and then the player stops. The
programmed sequence will remain in the memory until the power shuts off
(approximately 30 seconds) or until the CD door is opened.
• If you press the
PROG
and
PLAY/PAUSE
buttons again before the power
shuts off the programmed sequence will play again.
PROG
PROG
PROG
PROG
HD7999_031004.p65
11/3/2004, 10:15
