background image

12

6.) Playback will continue until the end of the disc, then the player will stop

automatically and the display will again show the total tracks on the disc. After

approximately 30 seconds the power switches ‘Off’ automatically to conserve

the batteries and the display goes blank. To stop playback before the disc

ends press the 

STOP

 

 button at any time. Press the 

STOP

 

 button after

the disc has stopped to shut the power ‘Off’ completely.

PAUSE CONTROL

To pause momentarily during playback press the 

PLAY/PAUSE

 

 button again.

The track number display flashes. The sound stops but the disc continues to spin.

Press the 

PLAY/PAUSE

 

 

button once more to cancel Pause mode and resume

normal playback. The track number display stops flashing.

SKIP/SEARCH CONTROLS

Press the 

 or 

 buttons repeatedly during playback to skip to higher or lower

numbered tracks. Playback will begin on the selected track.

To search within a track at high speed to locate a specific musical passage  press

and hold either the 

 or 

 controls. The player will search rapidly forward or

backward as long as the buttons are pressed.   The volume is automatically muted

during high speed search. Watch the elapsed time display. When the time display

reaches the desired point, release the buttons. Normal playback will resume at

that point and the volume returns to normal level.

HD7999_031004.p65

11/3/2004, 10:15

Summary of Contents for HD7999C








































Reviews: