7
TV OPERATION
TO VIEW A CHANNEL
Slide the TV/OFF/RADIO switch
to the TV position.
1
Tune a desired TV station by
turning the TUNING control
❶
and
adjusting the VOLUME control
❷
as desired.
2
1
3
Slide the TV/BAND switch to the
desired setting:
VHF LOW:
Channels 2–6
VHF HIGH:
Channels 7–13
UHF:
Channels 14–69
2
Adjust the rod antenna for best
reception.
4
Slide the TV/OFF/RADIO switch
to the OFF position to turn the
unit off.
6
Adjust picture controls, as
described below, for best picture.
5
V-HOLD
BRIGHTNESS
CONTRAST
If the picture moves up and down
or rolls, rotate to adjust the verti-
cal hold.
If the picture is too strong or too
weak, rotate to adjust the contrast
and clearly define the shades of
blacks, grays and whites.
If the picture is too light or too
dark, rotate to adjust the bright-
ness.
NOTES:
•
When you change channels, the rod antenna may have to be re-adjusted for best picture.
•
If reception is poor, even after adjusting telescopic antenna, use an external antenna. See page 6
for details.
GP308.O/M.QXD 8/7/02 3:43 PM Page 7
