D103744X012
Instruction Manual
May 2013
HSRL Series
www.fisherregulators.com
Figure 1. Type HSRL Series Regulators
HSRL Series LP-Gas Regulators
!
WaRninG
Failure to follow these instructions or
to properly install and maintain this
equipment could result in an explosion
and/or fire causing property damage and
personal injury or death.
Fisher
®
equipment must be installed,
operated, and maintained in accordance
with federal, state, and local codes and
Fisher instructions. The installation in
most states must also comply with
nFPa no. 54 and 58 standards.
Only personnel trained in the proper
procedures, codes, standards, and
regulations of the LP-Gas industry
should install and service this equipment.
Things to tell the gas customer:
1. Show the customer the vent or vent assembly or
vent tube. Stress that this opening must remain
unobstructed at all times. Tell the customer to
check the vent opening after a freezing rain, sleet
storm, or snow to make sure ice has not formed in
the vent.
2. Show the customer the shutoff valve on the
container. The customer should close this valve
immediately if gas is smelled, appliance pilot lights
fail to stay on or appear higher than usual or any
other abnormal situation occurs.
3. Tell the customer to call your company to service
the regulator if the regulator vents gas or a leak
develops in the system. Only a qualified gas
service person should install or service
the regulator.
