background image

Type EZR

Europe, Middle East and 

Africa Only

Summary

Introduction ......................................................................... 1

Description.......................................................................... 1

Characteristics .................................................................... 2

Labelling ............................................................................. 4

Operation ............................................................................ 5

Dimensions and Weights .................................................... 6

Installation .......................................................................... 7

Commissioning ................................................................... 9

Maintenance ....................................................................... 10

Spare Parts......................................................................... 13

INTRODUCTION

The 

Type EZR 

is a pilot-operated regulator used in 

transmission and distribution networks or pipe lines 

supplying industries and commercial businesses.

The 

Type EZR

 can be equipped with a slam shut Type OS2 

(Type EZR body change) which permits the gas flow to be 

cut off rapidly and totally in the case of under or over outlet 

regulator pressure.

Description

Main Valve

The Type EZR consists of:

A version without integral slam shut:

•  A body («E body» type), a bonnet

•  A regulation subassembly consisting of a slotted cage and 

a diaphragm/plug

•  A travel indicator, an inlet screen

•  A pilot assembly consisting of a filter, an adjustable restrictor 

and a pilot

A version with integral slam shut:

• 

A body («X body» type), a bonnet, a connecting part

•  A regulation subassembly consisting of a slotted cage 

and a diaphragm/plug

•  A travel indicator

•  A pilot assembly consisting of a filter, an adjustable restrictor 

and a pilot

•  A slam shut orifice

•  A integral O-ring tightshut valve/bypass assembly

•  A release relay Type OS2 according to 

D103683X012_OS2_IM:

  -  a mechanism box (BM)

  -  a safety manometric box (BMS) to be connected outlet 

side of the regulator

Pilot-Operated Regulator

Instruction Manual

D103681X012
January 2020

The 

Type EZR

 is in conformity with the 

PED 2014/68/EU and is classified in Category IV.

Figure 1. 

Type EZR Pilot-Operated Regulator

Summary of Contents for Fisher EZR

















Reviews: