Emerson Fisher 133H Instruction Manual Download Page 16

Page: 16 / 16

133 Series

The Emerson logo is a trademark and service mark of Emerson Electric Co. All other marks are the property of their prospective owners. Fisher is a mark owned by Fisher Controls, Inc., a

business of Emerson Process Management.

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or

guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications of such

products at any time without notice.

Emerson Process Management does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and maintenance of any Emerson

Process Management product remains solely with the purchaser.

Industrial Regulators

Regulator Division

Emerson Process Management

USA - Headquarters

McKinney, Texas 75070 USA

Tel: 1-800-558-5853

Outside U.S. 1-972-548-3574
Asia-Pacific

Shanghai, China 201206

Tel: +86 21 2892 9000

Europe

Bologna, Italy 40013

Tel: +39 051 4190611

natural gas Technologies

Regulator Division

Emerson Process Management

USA - Headquarters

McKinney, Texas 75070

Tel: 1-800-558-5853

Outside U.S. 1-972-548-3574
Asia-Pacific

Singapore, Singapore 128461

Tel: +65 6777 8211
Europe

Bologna, Italy 40013

Tel: +39 051 4190611

Gallardon, France 28320

Tel: +33 (0)2 37 33 47 00

TESCOM

Regulator Division

Emerson Process Management

USA - Headquarters

Elk River, Minnesota 55330 USA

Tel: 1-763-241-3238

Europe

Selmsdorf, Germany 23923

Tel: +49 (0) 38823 31 0

For further information visit www.emersonprocess.com/regulators

Key Description

Part number

19* O-Ring, nitrile (NBR)

Types 133L and 133H (2 required)

1E5914X0042

Type 133Z (1 required)

1E5914X0042

Type 133HP (2 required)

F1367806562

20 Hex Nut

Types 133H, 133L, and 133Z, aluminum

1D5297X0012

Type 133HP

1A413224122

21 Diaphragm Plate, plated steel

10A3054X012

22* Diaphragm, nitrile (NBR) and nylon (PA)

10A3055X012

23 Washer, plated steel (2 required)

10A3056X012

24* Guide Bushing, nylon (PA)

10A3057X012

25 Stem Sleeve, 303 stainless steel

10A3061X012

26 E-Ring, plated steel

1F599428982

27 Roll Pin, steel

1E954028992

28* Valve Disk Assembly, aluminum/neoprene (CR)

10A3058X012

29 Registration Disk, nylon (PA)

10A3060X012

30 Washer, zinc plated steel

1D716228982

31 Hex Nut, zinc plated steel

1C121928982

32* O-Ring, nitrile (NBR)

1J1079X0012

33 Stud, alloy steel (4 required)

10A3062X012

34 Locknut, plated alloy steel (4 required)

10A3063X012

35 Cap Screw, plated steel

Types 133H, 133L, and 133Z (12 required)

1B136324052

Type 133HP (12 required)

1E760324052

36 Hex Nut, plated steel

Types 133H, 133L, and 133Z (12 required)

1A309324122

Type 133HP

1A346524122

37 NamePlate, aluminum

11A0470X0A2

38 NamePlate, brass

13A0496X0A2

39 Set Screw, alloy steel (2 required)

10A3051X012

40* Thrust Washer, nylon (PA)

Type 133H only

1V9661X0012

Key Description

Part number

41 Upper Spring Seat, brass

Type 133Z only

1K633514012

Type 133HP

1H140124092

42 Spring Retainer, brass

Type 133Z only

1K633814012

43 Ball, 440C stainless steel (10 required)

Type 133Z only

1B793546202

44 Extension Spring, steel

Type 133Z only, Black stripe

1K633427012

45 Retaining Ring, plated steel

Type 133Z only

10A3074X012

46 Restriction Collar, aluminum

25% capacity

12A7404X012

40% capacity

12A7402X012

60% capacity

12A7403X012

47 Set Screw

1N830528992

49 Pipe Nipple, plated steel

1A473526012

50 Vent Assembly, Type Y602-7

17A6572X022

51 Street Elbow, plated steel

1A913221992

52 Upper Diaphragm Casing, steel

2F581125062

53 Cap Screw, (4 required) plated steel

1D529824052

54* Adaptor O-Ring, nitrile (NBR)

1F914106992

55 Cap Screw, (6 required) plated steel

1A368424052

56 Mounting Bracket, plated steel

1H140025032

57* Mounting Bracket Gasket, neoprene (CR) (2 required) 1H140404022

58 Lock Washer, plated steel

1A487828992

59 Hex Jam Nut, plated steel

1A319224122

60 Casing Adaptor, steel

37B4486X012

61* Diaphragm Washer O-Ring, nitrile (NBR)

1C782206992

62 Cap Screw, (6 required) plated steel

1A341824052

*Recommended spare parts.

Summary of Contents for Fisher 133H

















Search results

Summary of Contents for Fisher 133H

Reviews:

Related manuals for Fisher 133H

Brands by name

Popular brands

Emerson Fisher 133H, Instruction Manual

Search results

Summary of Contents for Fisher 133H

Reviews:

Related manuals for Fisher 133H

Brands by name

Popular brands