Instruction Manual
D101322X012
1051 and 1052 Size 33 Actuators
June 2017
26
Figure 11. Parts Used for the H Mounting Adaptation
50B1581‐C
A3780‐1
NOTE:
REQUIRES APPROPRIATE LEVER (KEY 27) FOR H MOUNTING ADAPTATION ‐ SEE PARTS LIST.
2. STYLE A MOUNTING SHOWN. FOR STYLE B, ASSEMBLE PARTS LISTED AND TRAVEL INDICATOR COMPONENTS ON OPPOSITE ENDS OF LEVER.
1
1051
KEY
1052
KEY
Figure 12. Standard and Reverse Constructions of the Stub Shaft Used for H Mounting Adaptations
50B1581‐B
STANDARD
CONSTRUCTION
REVERSE
CONSTRUCTION
Parts Used For H Mounting
Adaptations (figure 11)
Key
Description
Parts For Use With 1051 Actuators Only
77
Stub Shaft, steel (1 req'd for valve mounting: 2 req'd for use
with manual actuator or wrench‐operated extension)
79
Pin, steel (1 req'd for each stub shaft)
Parts For Use With 1052 Actuators Only
87
Stub Shaft, steel (1 req'd for valve
mounting; 2 req'd for use with manual
actuator or wrench‐operated extension)
89
Pin, steel (1 req'd for each stub shaft)
