Emerson EWL20S5, Service Manual

Page: 12 / 54

4-1 L2601DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts, and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
2. Disassembly Method
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to the following "Reference Notes in the
Table."
Step/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Unclamp/
Desolder
Note
[1]
Rear
Cabinet
D1 12(S-1), (S-2), 4(S-3) ---
[2] Jack Holder D2 3(S-4), (S-5) ---
[3]
Inverter
CBA D2
D3
4(S-6), *CN301,
*CN302, *CN303,
*CN304, *CN310
---
[4] Main CBA
D2
D3
6(S-7), *CN1201,
*CN1202, *CN1205,
*CN1206, *CN1207,
*CN801
---
[5]
LCD
Module
D2 13(S-8) ---
[6]
Function
CBA
D2 3(S-9) ---
[7]
IR Sensor
CBA
D2 2(S-10) ---
[8] Speaker (s) D2
4(S-11),
Speaker Holder(s)
---
[3] Inverter CBA
[4] Main CBA
[1] Rear Cabinet
[8] Speaker (s)
[2] Jack Holder
[7] IR Sensor CBA
[9] Front Cabinet
[6] Function CBA
[5] LCD Module
[9]
Front
Cabinet
D2 --------------- ---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
Step/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Unclamp/
Desolder
Note