background image

IMPORTANT TELEPHONE COMPANY&
FCC INFORMATION

FCC NOTES

This device complies with Part 15 of the FCC Rules. Operation is subject to the  

following two conditions: (1) This device may not cause harmful interference, and (2) 

This device must accept any interference received, including interference that may 

cause undesirable operation.

WARNING:

Changes or modifications to this unit not expressly approved by the party responsible 

for compliance could void the user’s authority to operate the equipment.

NOTE

:

This equipment has been tested and found to comply with the limits for a Class B digital 

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference in a residential installation.  This 

equipment generates, used in accordance with the instructions, may cause harmful

interference to radio communication. However, there is no guarantee that interference 

will not occur in a particular installation. If this equipment does cause harmful  

interference to radio or television reception, which can be determined by turning the 

equipment of f and on, the user is encouraged to try to correct the interference by one 

or more of the following measures:

-  Reorient or relocate the receiving antenna.

-  Increase the separation between the equipment and receiver.

-  Connect the equipment into an outlet on a circuit different from that to which the 

   receiver is connected.

-  Consult the dealer or an experienced radio / TV technical for help.

Thank you for purchasing an Emerson phone product, Your Emerson telephone is 

designed to provide many years or trouble free performance .Please follow the safety 

and operating instructions below.

CAUTION: When using telephone equipment , 
there are basic safety instructions that should 
always be followed .Refer to the 

IMPORTANT

SAFETY INSTRUCTIONS

 provided with this 

product and save them for future reference.

3

Summary of Contents for EM2246HS










Reviews: