Emerson Dixell XEC Supercap, Installing And Operating Instructions

Page: 3 / 16

1592010460 XEC GB rel.1.0 26.01.2015 XEC 3/16
1. Installation notes

symbol alerts the user of important operating and
maintenance (assistance) instructions found in the documentation
attached to the device.

This manual forms part of the product and must always be kept
near the device for easy and quick reference. The device cannot be
used as a safety device. Verify the limits of application before using
the device.
XEC Supercap must be installed in environments that have the following
characteristics:

Environment temperature and humidity must be within the range
stated in this document

XEC Supercap should not be exposed to direct sunlight and
protected from water and high atmospheric humidity in order to
prevent condensation from forming

XEC Supercap must not be subjected to mechanical stress
(vibration and/or direct hits)

Sulfur, ammonia, smoke and salt can cause corrosion and oxidation

XEC Supercap must not be installed in environments containing
flammable or explosive gases

XEC Supercap must not be installed in dusty environments

XEC Supercap must not be installed near devices that can
generate electromagnetic interference

XEC Supercap module must be installed inside electrical panels;
pay attention to:
o
guarantee adequate distance between the module and
power electrical devices
o
ensure sufficient air circulation around the device