Emerson DECT 6.0 EM6113 User Manual Download

Page: 9 / 12

Answering machine

CAUTION: To reduce the risk of personal injury, fire, or damage use only the

EM6113 power adaptor listed in the user’s guide. This power adaptor is

intended to be correctly orientated in a vertical or floor mount position.

5. Allow the phone to charge for 16 hours prior to first use. If you don't properly charge

the phone, battery performance is compromised

The integrated digital answering machine offers a total recording time of up to 11 minutes

for outgoing and incoming messages. Self recorded memos are treated like messages.

You can operate the answering machine at the base station. An internal voice will give

you advice. You can switch the language from German to french. Using a telephone

with tone dialling (DTMF) you have also a PIN protected remote access.
You can select between two mode:

- Answer and record

- Answer only
A standard announcement is already saved for every operating type at the delivery stage.

Therefore the answering machine is immediately operational. At “Answer and record” and

reaching of the maximum recording capacity the device will automatically switch to the

operating type “Answer only”.

If the answering machine is turned off the announcement for the operating type “Answer

only” will be played after approx. 10 rings.

When playback messages the voice will give you information about day and time of the

relevant call (only when date and time were set correctly).

The display gives you information:

Digits steadily on: Number of old (already heard) messages Flashing digits:

Number of new messages.

TAM memory is full.

Turning the answering machine on/off

Press briefly .

Number of rings - setting /checking

The number of rings after which the answering machine will answer calls can be set from

2 - 9 and tS (toll saver). The standard setting is 5 rings. In toll saver mode, the machine

will answer after 5 rings if there are no new messages, and after 2 rings if there are new

messages. If there are no new messages and you call your machine to check your

messages remotely, you can hang up after the 2nd ring. You do not need to pay

connection fees and you know that you do not have any new messages.
Press briefly to check the setting.
Press and HOLD to enter setting mode. Use the and to set the number

of rings.
Press for confirmation.

Dialing from the phonebook /viewing entries

The handset is in idle state

Press the button. Select and entry. Press the button repeatedly, to show the

telephone number and the melody.
Press the button. The displayed telephone number is being dialed.

Editing an entry

The handset is in idle state

Press the button.
Press the button. Select

EDIT ENTRY,

using the or the button, and press

the button. Edit name if necessary and press the button. Edit number if
necessary and press the button. Change melody and press the button.
Press the button to delete the last character or press and

HOLD

the button to

delete the whole entry. You can enter a dialing pause (approximately 3 seconds) by
pressing the button.
Press the button again to store the edited entry.

Deleting entries

When the desired entry is displayed, press the button. Select

DELETE ENTRY

DELETE ALL

if necessary and press the button. The entry or all entries will be

deleted.

TALK

MEMORY

MENU