manualshive.com logo in svg

Emerson CKD2328, Owner'S Manual

Share
Download
Emerson CKD2328 Owner'S Manual Download Page 28

2 7

ALARM Function

You can use the alarm function to wake you to an electronic buzzer tone, the radio,

or your favorite CD.

First press the 

ALARM SET

 button on the front panel to check the Wake Up time

setting. Adjust the Wake Up time if necessary. Then press the 

ALARM ON/OFF

button on the top panel. The Alarm “On” indicator 

 appears in the display..

Wake To Buzzer

Press the 

STANDBY/ON 

 button to put the system in the Standby (Power ‘Off’)

mode. Set the 

MUSIC 

 /

BUZZER

 

 switch on the top panel to the 

BUZZER

 position. At the selected wake up time the buzzer will sound. It will continue for

one hour and then shut off automatically. To stop the alarm sooner press the

ALARM ON/OFF

 button once or 

STANDBY/ON 

 button on the front panel.

Wake To Radio

Tune to the desired radio station and adjust the volume to the level you want to

hear in the morning when the alarm comes on.  Press the 

STANDBY/ON 

 button

to put the system in the Standby (Power ‘Off’) mode. Set the 

MUSIC

 

 /

BUZZER

 switch on the top panel to the 

MUSIC

 

 position. At the selected wake up

time the radio will turn on. It will continue for one hour and then shut off automatically.

To stop the radio sooner press the 

ALARM ON/OFF

 button once or 

STANDBY/

ON 

 button on the front panel.

CKD2328_2330_B091103.p65

11/9/2003, 14:51

27

Summary of Contents for CKD2328





































Reviews:

No comments

Brands by name

Popular brands

Load more brands