manualshive.com logo in svg

Emerson CKD2328, Owner'S Manual

Share
Download
Emerson CKD2328 Owner'S Manual Download Page 22

2 1

PAUSE Control

To pause momentarily during CD playback press the 

PLAY/PAUSE 

 button on

the front panel or on the remote control (Model CKD2330 only) again. The sound

stops and the 

PLAY

 indicator flashes but the disc continues to spin.

Press the 

PLAY/PAUSE 

 button again to cancel the Pause mode and resume

normal playback. The sound resumes at the same point on the disc and the 

PLAY

indicator stops flashing.

SKIP/SEARCH Controls (

 / 

)

During playback press the 

SKI

P Forward 

 or 

SKIP

 Reverse 

 buttons on the

front panel or on the remote control (Model CKD2330 Only) repeatedly to skip

forward or back to higher or lower numbered tracks. Playback will start at the

beginning of the selected track.

To search within a track for a specific musical passage depress and hold the 

SKIP

Forward 

 or 

SKIP

 Reverse 

 buttons on the front panel or on the remote

control (Model CKD2330 Only). The player will search rapidly forward or backward

as long as the buttons are depressed. When you hear the desired passage release

the buttons and normal playback will resume at that point.

To start playback from a specific track load your disc as usual and wait until the

display shows the total number of tracks. Press the 

SKIP

 Forward 

 or 

SKIP

Reverse 

 buttons repeatedly until the desired track number appears in the display

then press the 

PLAY/PAUSE 

 button to begin playback on the desired track.

PLAY

CKD2328_2330_B091103.p65

11/9/2003, 14:51

21

Summary of Contents for CKD2328





































Reviews:

No comments

Brands by name

Popular brands

Load more brands