background image

13.

Remove one of the screws from the switch adapter.
Retain for future installation. Loosen the two
remaining screws in the switch adapter for
installation of the switch housing cover plate
(Figure 7). 

14.

Place the switch housing cover plate onto the
switch adapter. Engage the keyholes of the switch
housing cover plate by rotating the switch housing
cover plate clockwise on the switch adapter.
Retighten the two screws and reinstall the screw
previously removed. Tighten all three screws
securely (Figure 7).

15.

Engage the connector of the switch housing
assembly with the motor connector (Figure 8). The
two connectors are keyed and color-coded and
must be mated correctly (color-to-color) before they
can be engaged. Make sure the connector latch
closes properly.

16.

Position the switch housing assembly on the switch
housing cover plate and align the holes in the
switch housing assembly with the holes in the plate.
Secure the switch housing assembly by installing
the three switch housing screws  (supplied)
(Figure 9).

NOTE: Do not pinch wires between the switch
housing assembly and the switch housing plate.

17.

You have now completed the assembly of your new
ceiling fan. You can now proceed with hanging and
wiring your fan.

SWITCH HOUSING 
ASSEMBLY

SWITCH HOUSING 
ASSEMBLY 
CONNECTOR

MOTOR HOUSING 
CONNECTOR

Figure 8

REMOVE SWITCH 
ADAPTER SCREW

SWITCH HOUSING 
COVER PLATE

LOOSEN SWITCH 
ADAPTER 
SCREWS (2)

SWITCH 
ADAPTER

Figure 7

SWITCH 
HOUSING 
ASSEMBLY

SWITCH 
HOUSING 
SCREW (3)

Figure 9

6

E.T.L. Model No.: CF772

Summary of Contents for CF755BS00

















Reviews: