1.
Check to see that you have received the following
parts:
NOTE: If you are uncertain of part description, refer
to exploded view illustration.
a. Fan motor assembly
b. One switch housing assembly
c. One ceiling cover
d. Five blade flanges
e. One hanger ball/4.5” downrod assembly
f. One hanger bracket
g. One coupling cover
h. Five fan blades
i. One loose parts bag containing:
1. Sixteen M5 x 6mm washer head
blade screws
2. One M4 x 12mm flat head screw
3. One M6 x 14mm pan head screw with
lockwasher
4. One die-cast pendant
5. One pendant coupler
6. Three wire connectors
7. Two threaded studs
8. Two knurled knobs
9. Two lockwashers
10. One clevis pin
11. One hairpin clip
12. One balance kit
NOTE: Place the parts from the loose parts bags in
a small container to keep them from being lost. If
any parts are missing, contact your local retailer or
catalog outlet for replacement before proceeding.
2.
Remove the fan assembly from the protective plastic
bag. Place the fan assembly into the upper foam pad
with the bottom of the motor facing up.
The upper foam pad serves as a holder for the fan
during the first stages of assembly.
3
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF452
LOOSE PARTS
BAG
CEILING
COVER
BLADE
FLANGES
COUPLING
COVER
HANGER
BRACKET
HANGER BALL/
DOWNROD ASSEMBLY
SWITCH HOUSING
ASSEMBLY
FAN MOTOR
ASSEMBLY
BLADES
1. Unpacking Instructions
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Co. could result in personal injury
or property damage.
WARNING
!
Do not install or use fan if any part is damaged or
missing. Call Toll-Free:
1-800-654-3545
WARNING
!
