1.
Check to see that you have received the following
parts:
NOTE: If you are uncertain of part description,
refer to exploded view illustration.
a. Fan motor assembly
b. Five fan blades
c. One ceiling cover
d. Five blade flanges
e. One hanger ball/downrod assembly
f. One hanger bracket
g. One switch housing assembly
h. Two 60-watt candelabra bulbs
i. One light fitter
i. One glass bowl
k. One loose parts bag containing:
1. Sixteen M5 x 6mm washer
head blade screws
2. Two threaded studs, #8-32 x 1-1/4”
3. Two lockwashers, #8-32
4. Two knurled knobs, #8-32
5. Two wood pendants
6. Two couplings
7. Three wire connectors
8. One clevis pin
This Manual Is Designed to Make it as Easy as Possible for You to Assemble,
Install, Operate and Maintain Your Ceiling Fan
Tools Needed for Assembly
One Phillips head screwdriver
One stepladder
One 1/4” blade screwdriver
One wire stripper
MATERIALS
Wiring outlet box and box connectors must be of type
required by the local code. The minimum wire shall be
a 3-conductor (2-wire with ground) of the following
size:
3
Installed Wire Length
Wire Size A.W.G.
Up to 50 ft.
14
50-100 ft.
12
Unpacking Instructions
For your convenience, check-off boxes are provided next to each step. As each step is completed, place a
check mark in the box. This will insure that all steps have been completed and will be helpful in finding
your place should you be interrupted.
Before assembling your ceiling fan, refer to section on
proper method of wiring your fan (page 7). If you feel
you do not have enough wiring knowledge or
experience, have your fan installed by a licensed
electrician.
Do not install or use fan if any part is damaged or
missing. Call Toll-Free:
1-800-654-3545
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Company. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Company could result in
personal injury or property damage.
9. One hairpin clip
10. Eleven M6 x 12mm flange head screws
with lockwashers
NOTE: Place the parts from the loose parts bags
in a small container to keep them from being lost.
If any parts are missing, contact your local
retailer or catalog outlet for replacement before
proceeding.
2.
Remove the fan housing assembly from the
protective plastic bag. Turn the upper styrofoam
pad over and carefully place the fan motor
assembly into the recess in the pad with the top of
the motor facing up.
A
C
D
E
I
K
B
J
H
G
F
WARNING
!
WARNING
!
WARNING
!
U.L. Model No.: CF701