November 2021
Installation, Operation and Maintenance Manual
VCIOM-15590-EN Rev. 0
Connection
4
Section 2: Connection
Customer connection at the end of the line, bus termination
There are no further PROFIBUS subscribers before or after the slave. Connection for the cables:
Figure 4
Single Channel
Figure 5
Dual Channel
Bus termination:
The bus has to be terminated on both ends of the PROFIBUS line. This termination can be
made via the built-in terminating resistors, which are actively supplied by the actuator. The
terminating resistors are enabled when the switch on the terminal board is switched to “ON”.
