![background image](http://html.mh-extra.com/html/emerson/bettis-q-series/bettis-q-series_installation-operation-and-maintenance-manual_101551044.webp)
Disassembly
8.7
Cleaning the Components
In case of maintenance, use a clean dry cloth and thoroughly wipe clean and remove old
grease from:
•
The inside and outside of the body including thread holes and crevices/grooves.
•
The pinion gears.
•
The pistons.
40
April 2019
Installation, Operation and Maintenance Manual
DOC.IOM.BQ.E Rev. 3
Section 8: Disassembly