Emerson AXP640-AC2-110VAC, Installation & Use Manual

Page: 104 / 190

AXP640 Shelf Installation
AXP640 Installation and Use (6806800M24E )
104
Upgrade Process Steps
Follow these steps to upgrade the PEM firmware:
1. Copy the
AXP640_DCPEM-upgrade-x_xx_xxx.hex
file to the
/tmp
directory
on the active Shelf Manager.
2. Execute the following command to upgrade one PEM:
# ipmcUpgrade.sh 66 AXP640_DCPEM-upgrade-x_xx_xxx.hex
reboot=n
3. After a successful upgrade, the
ipmcUpgrade
script displays the current firmware
level reported by the device as shown in PEM Upgrade Sample Output on page 104 .
5.12.2.1 PEM Upgrade Sample Output
The sample output for this command for one PEM is shown below.
# ipmcUpgrade.sh 66 AXP640_DCPEM-upgrade-1_04_008.hex reboot=n
------------ SCRIPT REVISION -----------
REVISION ..... 1.03 $
----------- SCRIPT PARAMETERS ----------
IPMI ADDRESS ..... 0x66
UPGRADE TARGET ..... IPMC (IMC)
FW IMAGE ..... AXP640_DCPEM-upgrade-
1_04_008.hex(EXISTS)
--------------- SHM CHECK --------------
The /tmp directory on the shelf manager is mounted to ram; this copy of the file will be
deleted on the next reset of the shelf manager. If you want to save the file to flash, copy it to
the /var/nvdata directories on both shelf managers.