manualshive.com logo in svg

Emerson AMS Trex, User Manual

Share
Download
Emerson AMS Trex User Manual Download Page 62

Online menu example

Figure 3-2:   

Dashboard menu

A device dashboard menu displays the same parameters as the 

Online

 menu, but they are

organized by tab, including:

•

Overview

 - View a graphical representation of the process variable. Tap the 

More

 arrow

on the bottom right side of the screen to access additional menu items. Depending
on the device description, the images under "Device" and "Communications" may be
selectable links.

•

Service Tools

 - View and modify options for alerts, variables, and maintenance. For

FOUNDATION fieldbus devices, the 

Service Tools

 option lets you edit the device tag

and address, and set the IO block schedule and the link master device. You can also
access the blocks directly from the 

Block List

 option on the Service Tools screen.

•

Configure

 - Configure the device parameters.

The options below vary based on the device description for the device.

Field Communicator application

54

User Guide

Summary of Contents for AMS Trex























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands