Emerson AMPGARD RVSS, Instruction Booklet

Page: 47 / 169

47 EATON
www.eaton.com
Instruction Booklet IB020003EN
Effective January 2021
AMPGARD RVSS
Reduced Voltage Soft-Starter
User Manual
Warn
The Warn indicator illuminates whenever a preset warning threshold
event has occurred.
9.2.3 MUI Navigation and Programming
The MUI interface lists topics using a hierarchical menu structure.
Top level menus have subtopics, which may have their own
subtopics.
MUI navigation and programming is performed using the three
contextual buttons and the MODE/BACK button.
•
Use the MODE/BACK button to navigate the MUI top menu selections, to exit a
menu topic, and to return from submenu operations to higher level menus.
•
Use the contextual buttons to make menu selections:
• OK to choose a topic
•
56
to navigate from topic to topic
• EDIT to initiate changes
•
56
to change values
• SAVE to save changes
• MODE/BACK
to return from a topic
• LATER, NO, YES to signal choices.
Figure 46 shows the MUI having used the
MODE/BACK
button
to move the menu cursor to the PRG menu, and ready to select
subtopic 1. Control by clicking the OK button. If another subtopic is
desired, the
56
buttons can be used to select other subtopics.
Once on a topic, click the
OK
button to select it and the
EDIT
button
for editing. Use the
56
buttons to increment or decrement the
topic selections (numerical or states), click SAVE to save changes,
and click the MODE/BACK button to go back to the top menu for
another menu selection.
Figure 46. MUI at the PRG | 1. Control subtopic.
RVSS Setup using the MUI
Configuring the RVSS through the MUI can be done in either of two
ways:
•
Program menu ( PRG ) permits configuring the starting profiles and other system
parameters.
•
Setup Wizard permits defining the motor characteristics and choosing one of up to
two previously defined starting profiles;
Setup wizard
The Setup Wizard sets basic system parameters required for optimal
operation. The wizard selection appears on first power-up and can
also be accessed directly by using the Mode/Back button to select
the PRG menu item, use the
56
buttons to navigate to selection
15. Setup Wizard , then click the OK contextual menu button to select
the Setup Wizard . From there, use the Next contextual button to
navigate to a topic, and the Edit contextual button to modify its
setting. See Figure 47 .
Figure 47. Setup wizard Active Op Mode setting.
When the MUI is powered up, the display offers immediate access
to the Setup Wizard. The MUI Setup Wizard gives access to an
abbreviated list of control parameters. A complete list of the RVSS
control parameters can be accessed from the
PRG
menu.
Table 10 shows the Setup Wizard list entries as they appear on the
MUI display screen. Table 11 shows the Monitoring menus and their
topics.
Table 12
shows the complete list of Program menu groups
and the settings in each group.
Figure 48. MUI setup wizard selection on power-up.
MUI navigation
Click the
PREV and NEXT contextual buttons to access each entry
in turn. Click EDIT to make entry changes. Click the PREV and NEXT
contextual buttons to scroll through modes, and the to increment or
decrement numerical values. Press and hold the
56
contextual
buttons to increment first by units, then by tens, then by hundreds.
Click SAVE to save changes.
Table 10 shows the MUI Setup Wizard parameters and their default
values.