3
1.
Unpack the items carefully to avoid damage to any
of the components.
Check to see that you have received the following
parts:
NOTE: If you are uncertain of part description,
refer to the exploded view illustration.
a. Fan motor assembly
b. One ceiling cover
c. One coupling cover
d. One switch cup cover
e. One switch cup
f. Five fan blades
g. Five fan blade holders / flanges
h. One hanger bracket
i. One hanger ball/downrod assembly
j. One canopy seal pad
k. One loose parts bag, containing:
1. One clevis pin
2. One hairpin clip
3. Sixteen M5 x 6mm washer head blade
screws
4. Two #8-32 x 1-1/4" threaded studs
5. Two #8 external tooth lockwashers
6. Two #8-32 knurled knobs
7. One M6x14mm pan head screw with
lockwasher (spare)
8. One M4x12mm flat head screw (spare)
9. One M4x10 serrated pan head screw
(spare)
10. One balancing kit
Model No.: ACF552
Tools Needed for Assembly
One Phillips head screwdriver
One stepladder
One small blade screwdriver
One wire stripper
The fan must be installed by a licensed electrician.
WARNING
THIS FAN IS SUITABLE FOR WET LOCATIONS SUCH AS PORCHES, PATIOS, AND DECKS.
USE ONLY WITH LIGHT KITS MARKED SUITABLE FOR USE IN WET LOCATIONS.
Unpacking Instructions
For your convenience, check-off boxes are provided next to each step. As each step is completed, place a
check mark in the box. This will insure that all steps have been completed and will be helpful in finding
your place should you be interrupted.
Do not install or use fan if any part is damaged or
missing, call:
1300 469 326
WARNING
!
NOTE: Intermixing blades between fans can
cause excessive wobble. Keep blades in original
sets of five.
a. Fan Motor Assembly
d. Switch Cup Cover
h. Hanger Bracket
i. Hanger Ball/Downrod
Assembly
k. Loose Parts Bag
g. Fan Blade Holders/Flanges
j. Canopy Seal Pad
f. Fan Blades
c. Coupling Cover
b. Ceiling Cover
e. Switch Cup
MATERIALS
Wiring and connectors must be of type required by
local regulations. The minimum wire would be a
3-conductor (2-wire with ground).
This manual is designed to make it as easy as possible for your Electrician to assemble and install
your ceiling fan.
