Emerson 1061, Instruction Manual

Page: 16 / 20

V250 Valve
Instruction Manual
Form 5206
April 2004
16
Parts Ordering
When corresponding with your Fisher sales office
about this equipment, always mention the valve
serial number. When ordering replacement parts,
also specify the complete 11-character part number
of each part required from the following parts list.
Note
Use only genuine Fisher replacement
parts. Components that are not
supplied by Fisher should not, under
any circumstances, be used in any
Fisher valve, because they will void
your warranty, might adversely affect
the performance of the valve, and
might jeopardize worker and
workplace safety.
Note
Fisher does not assume responsibility
for the selection, use, or maintenance
of any product. Responsibility for
proper selection, use, and
maintenance of any Fisher product
remains solely with the purchaser and
end-user.
Parts Kits
Part kits include keys 10, 11, 12, 13, 16, 18, 19, and 23.
See following table.
VALVE SIZE,
INCHES
KIT PART NUMBER
VALVE SIZE,
INCHES
Single Seal Dual Seal Flow Ring
4 RV250X00412 RV250X00422 RV250X00432
6 RV250X00612 RV250X00622 RV250X00632
8 RV250X00812 RV250X00822 RV250X00832
10 RV250X01012 RV250X01022 RV250X01032
12 RV250X01212 RV250X01222 RV250X01232
16 RV250X01612 RV250X01622 RV250X01632
24 RV250X02412 RV250X02422 RV250X02432
KEY NUMBER DESCRIPTION
QUANTITY IN KIT
KEY NUMBER DESCRIPTION
Single
Seal
Dual Seal
Flow
Ring
Key 10 Shim seal 2 4 2
Key 11 Ball seal 1 2 ---
Key 12 Gasket 1 1 1
Key 13 O-ring 1 2 1
Key 16 Seal ring 2 2 2
Key 18
Bushing spacer
shim
4 4 4
Key 19 Washer 2 2 2
Key 23 O-ring 2 2 2
Parts List
Note
Except where indicated, sizes shown are valve
sizes.
Key Description Part Number
1 Valve Body
If you need a valve body as a replacement part, order by valve
size and trim diameter, serial number, and desired material.
2 Ball
3 Outboard Seal Carrier
4 Stud Bolt
5 Valve Outlet (for single ball seal & flow ring constructions only,
none req’d for dual ball seal construction)
6 Drive Shaft
7 Follower Shaft
8 Hex Nut
9 Pin
10* Shim Seal, S31600 SST (a maximum
of 14 req’d for any construction)
4-inch 18A2529X012
6-inch 18A2554X012
8-inch 18A2585X012
10-inch 18A2618X012
12-inch 18A2646X012
16-inch 18A4577X012
20-inch 18A4610X012
24-inch 18A4644X012
11* Ball Seal, Delrin 50 (1 req’d for single ball seal
construction; 2 req’d for dual ball seal construction;
none req’d for flow ring construction)
4-inch 18A2528X012
6-inch 18A2553X012
8-inch 18A2584X012
10-inch 18A2617X012
12-inch 1R834706372
16-inch 18A4576X012
20-inch 18A4609X012
24-inch 18A4643X012
12* Gasket, PTFE
4-inch 18A2530X012
6-inch 18A2555X012
8-inch 18A2586X012
10-inch 18A2619X012
12-inch 18A2647X012
16-inch 18A4578X012
20-inch 18A4611X012
24-inch 18A5004X012
13* O-Ring (1 req’d for single ball seal & flow ring
constructions; 2 req’d for dual ball seal construction)
Nitrile
4-inch 19A1334X012
6-inch 18A2556X042
8-inch 1P5585X0042
10-inch 1V2826X0032
12-inch 18A2648X032
16-inch 18A4579X032
20-inch 13A7928X032
24-inch 18A5005X032
*Recommended spare parts