Emerson Research CKT9100 Owner'S Manual Download

Page: 29 / 40

2 8

SELECTING THE ALARM MODE

Your SmartSet

clock radio allows you to select from among three different alarm

operation modes for either alarm. The alarm modes are:

•

Everyday

– the alarm will turn on all 7 days.

•

Weekdays only

– the alarm will only turn on Monday through Friday;

•

Weekends only

– the alarm will only turn on Saturday and Sunday.

To check the Alarm Mode setting for Alarm 1, depress the

ALM 1

setting button.

The display will show the Alarm 1 wake up time and the day of the week indicators

will show you the alarm mode which is selected.

• If all 7 indicators are ‘On’, the Everyday mode is selected.

• If only the Monday through Friday indicators are ‘On’, the Weekdays only mode

is selected.

• If only the Saturday and Sunday indicators are ‘On’, the Weekends only mode is

selected.

To change the Alarm Mode setting for Alarm 1, hold the

ALM 1

setting button and

press the

ALM

(Alarm)

MODE

button until the day indicators show the desired

mode setting, Weekdays only, Weekends only, or Everyday operation. Release

the

ALM MODE

and

ALM 1

setting buttons and the display will return to the correct

time.

Follow the same procedure to select the desired Alarm Mode for Alarm 2 if

necessary.

CHECKING THE WAKE UP TIMES AND ALARM MODE

Whenever you want to check the wake up time or the alarm mode settings, simply

press either the

ALM 1

ALM 2

setting buttons. The display will change from

correct time to wake up time and the day indicators will show you the alarm mode

which is currently selected.

Release the

ALM 1

ALM 2

setting buttons to return to correct time.

CKT9100_090606.p65

6/9/2006, 11:00

Summary of Contents for CKT9100









































Search results

Summary of Contents for CKT9100

Reviews:

Related manuals for CKT9100

Brands by name

Popular brands

Emerson Research CKT9100, Owner'S Manual

Search results

Summary of Contents for CKT9100

Reviews:

Related manuals for CKT9100

Brands by name

Popular brands