Emerson Research CKT9100 Owner'S Manual Download

Page: 28 / 40

2 7

MANUAL TIME ADJUSTMENTS

Some people like to set their clocks 5 to 10 minutes fast to make sure that they will

always be on time. Even though the SmartSet

sets the time by itself, you still have

the option of adjusting the time manually if you wish.

To manually adjust the time display depress and hold the

TIME

button, and press

either the

SET +

SET –

buttons to adjust the time display ahead or back as

desired. Each press of the

SET +

SET –

buttons will change the display by one

minute. If you hold the

SET +

SET –

buttons the display will continue to change.

The display will change slowly at first, one minute at a time. But if you continue

holding the

SET +

SET –

buttons the display will change rapidly.

Note:

If you manually adjust the time, your new setting is entered into the SmartSet

memory. If the power is interrupted, the display will return to your new setting, not

the original setting, when the power is restored.

ADJUSTING THE WAKE UP TIMES

Your SmartSet

clock radio has two separate alarms that can be set and used

independently. You may use the alarms to wake two people at different times, or

you may use one alarm for weekdays and the other for weekend wake up times.

The procedure for adjusting the wake up time is the same for both Alarm 1 and

Alarm 2.

1.) Depress and hold either the

ALM 1

ALM 2

setting button. The display will

change from the correct time to the Alarm 1 or Alarm 2 wake up time.

2.) While holding the

ALM 1

ALM 2

setting button, depress either the

SET +

SET –

button to move the display ahead or back to your desired wake up time.

3.) When the desired wake up time appears on the display, release the

SET +

SET –

buttons.

Note:

Be sure that you have set the wake up time correctly by observing the

AM indicator. If the

indicator is ‘On’ the wake up time is “AM”. If the

indicator is ‘Off’, the wake up time is “PM”.

4.) When the desired wake up time (AM or PM) appears on the display, release

the

ALM 1

ALM 2

setting buttons.

CKT9100_090606.p65

6/9/2006, 11:00

Summary of Contents for CKT9100









































Search results

Summary of Contents for CKT9100

Reviews:

Related manuals for CKT9100

Brands by name

Popular brands

Emerson Research CKT9100, Owner'S Manual

Search results

Summary of Contents for CKT9100

Reviews:

Related manuals for CKT9100

Brands by name

Popular brands