Emerson Power Transmission Kop-Flex KOP-GRID H Series, Installation And Alignment Instructions

Page: 4 / 4

4 © Emerson Power Transmission Manufacturing, L. P. 1998. All Rights Reserved.
GRID REMOVAL:
Remove the coupling cover assembly. Insert a rod or screw
driver into the open end loop of the tapered grid. Use the teeth
on the coupling hub as a support to gradually and gently pry
off the grid, proceeding alternately from side to side.
Figure 7
Table 1
Form 17200 12/4/96
Printed in U.S.A.
INSTALLATION AND ALIGNMENT VALUES
SIZE
MAXIMUM RECOMMENDED
MISALIGNMENT LIMITS
GAP
(IN.)
COVER
BOLT
TORQUE
(LB-IN.)
ALLOWABLE
MAXIMUM
SPEED
(RPM)
LUBE/
GREASE
WEIGHT
(LB.)
OFFSET
(IN.)
ANGULAR
(IN.)
1020 0.006 0.003 0.125 100 4,500 0.07
1030 0.006 0.003 0.125 100 4,500 0.07
1040 0.006 0.003 0.125 100 4,500 0.11
1050 0.008 0.004 0.125 200 4,500 0.11
1060 0.008 0.005 0.125 200 4,350 0.20
1070 0.008 0.005 0.125 200 4,125 0.24
1080 0.008 0.006 0.125 200 3,600 0.37
1090 0.008 0.007 0.125 200 3,600 0.55
1100 0.010 0.008 0.188 260 2,440 0.95
1110 0.010 0.009 0.188 260 2,250 1.12
1120 0.011 0.010 0.250 650 2,025 1.61
1130 0.011 0.012 0.250 650 1,800 2.00
1140 0.011 0.013 0.250 650 1,650 2.50
KOP-FLEX, INC.
EMERSON POWER TRANSMISSION
P. O. Box 1696
Baltimore, MD 21203-1696