- 4 -
SEW-122595.2 EN
PARTS IDENTIFICATION
1.
Set screw for needle
2.
Needle
3.
Fastening plate
4.
Tension control
5.
Thread guide 2
6.
Needle arm
7.
Thread guide 1
8.
On/off switch
9.
Adapater input
10.
Battery compartment
11.
Rotary wheel
12.
Bobbin
13.
Extension spindle
14.
Threader
Note: always use the rotary wheel to move needle arm. Never press or pull directly on the needle arm to
avoid damages to the internal mechanism.
On/off switch: (Fig. 1)
Slide to position A: ON
Slide to position B: OFF
(Fig. 1)
INSTALL THE BATTERIES
1.
Make sure the “On/off switch” is on the OFF position
2.
Open the battery compartment cover.
3.
Insert 4xAA batteries into the compartment and close the battery cover.
Caution:
To prevent the accidental start-up of the appliance, always make sure that the “on/off switch” is on the
OFF position when inserting or removing the batteries.
When using the adapter, remember to remove all batteries from the machine.
AC/DC ADAPTER (NOT INCLUDED)
Adapter must be 6V 800mA and must use plug with 1/8”/3.5 mm diameter. Plugging an adapter into a socket
that has different ratings could damage the socket and adapter.
