- 4 -
BL-109909.2 EN
FEATURES
1.
Measuring cap
2.
Lid
3.
Jug
4.
Stainless steel blades
5.
Control knob
6.
Motor base
Switch speed setting
1.
P = Pulse
2.
0 = Off
3.
1 = Low
4.
2 = High
HOW TO USE
Caution: Make sure the motor base is unplugged from the power source and the control knob is set at the
position 0.
1.
Place the jug onto the motor base. Rotate the jug clockwise to have it locked on the motor base.
The jug
must be placed as shown on the above picture.
2.
Put the liquid and food, after dicing them, into the jug, making sure not to go over the maximum level marked
on the jug.
Note: Never fill the jug with ingredients that are hotter than 80°C.
3.
Put the lid onto the jug and put the measuring cap into the lid. Rotate the measuring cap to have it fixed
onto the lid.
4.
Put the plug into the wall socket. Switch on the appliance by rotating the control knob to choose the speed
1, 2 or pulse function.
5.
After use, rotate the control knob to the position 0 and remove the plug from outlet.
The appliance is equipped with a safety switch; it only works when the jug has been placed correctly.
CLEANING AND MAINTENANCE
1.
First remove the mains plug from the wall socket. Do not immerse the motor base in water. You can clean the
motor base with a humid cloth. Do not use abrasive cleaning materials.
2.
Disassemble the other parts after each use and wash them in soapy water. Then rinse with clean water and
dry thoroughly. Glass jug, lid and measuring cap can be cleaned in a dishwasher.
3.
It is easy to do the cleaning immediately after each use. Empty the jug and fill it with water. Turn the switch
several times at the “pulse” setting.
CAUTION
Never use boiling liquids.
Never run the blender empty or with solids only.
To reduce the risk of injury, never operate the appliance without the lid and measuring cap in place.
Do not remove the jug from the motor base while the appliance is in operation.
Do not use the appliance if blade assembly is bent or damaged.
This appliance is designed for intermittent operation. After 1 minute continuously operation it is required to be
switched off for 1 minute to prevent overheating. After 15 cycles, please switch it off for 1 hour.
Summary of Contents for BL-109909.2
Page 1: ......
