- 12 -
1.
Insert 4 fittings (A1) into the end of the long pipe openings.
2.
Connect the short pipe (A3) with the long pipe (A2). Make sure they are fixed firmly.
3.
Attach the short metal shelf (A4) and the long metal shelf (A5) onto the pipe. Fix with the nut (A7) and the
screw (A6).
4.
Assemble the other 3 pieces of stands as above process.
5.
Place the main body on top of the stand. Place the wind shield onto the main body. And place the wire rack
(A8) onto the shelves.
OPERATION
1.
First fill the main body with cold water. Do not add water over the Max line inside the main body.
During use the water in the main body will evaporate and should be refilled. Otherwise the product will get
too hot.
Note: Make sure you do not drip water on to the element.
2.
Place the heating element with the control box onto the main body. First insert two rods in the other end of
the heating element into the two small holes in the main body, then rest the control box on the main body.
Make sure the control box is fixed firmly onto the main body. Otherwise, the appliance cannot be switched
on.
3.
Place the barbecue grill onto the main body. Fix the barbecue grill into the slots to choose a high or a low
grilling position (refer to below pictures). Attention! The barbecue grill must not touch the heating element
under any circumstances.
(Low grilling position) (High grilling position)
4.
Connect the power plug into a suitable outlet.
5.
Turn the control knob to the “MAX” position, the indicator light will illuminate to indicate the heating
element is heating up.
6.
After approximately 5-10 minutes, the heating element reaches the suitable temperature. Please place your
food on the barbecue grill for grilling. During use, you can turn the control knob back to choose your desired
position. Deep frozen food should be defrosted completely before barbecuing.
7.
To grill food evenly, it should be turned several times during the barbecue. The barbecuing time depends
on the food to be grilled.
8.
Caution! To avoid a heat accumulation, do not place aluminum foil or other barbecue accessories on the
barbecue grill.
9.
During use the water in the main body will evaporate and should be refilled. Otherwise the product will get
too hot.
Note: Make sure you do not drip water on to the element.
10.
To switch off the appliance, turn the control knob to “0” position and unplug the power cord from outlet.
11.
The barbecue grill, the heating element and the control box and other parts must be removed only after
the appliance has cooled down completely.
Summary of Contents for BG-114447.2
Page 1: ......
