32
6- & 8-Quart Emeril Lagasse Pressure Air Fryer™
Troubleshooting
Symptom
Possible Cause
Solution
Cannot open Pressure
Lid
DO NOT FORCE OPEN.
Pressure Lid does not
lock
Inner Lid Rubber Gasket is not properly
installed
Reinstall Inner Lid Rubber Gasket.
Cannot open Pressure
Lid after pressure is
released
Float Valve and Pressure Release Valve
are still raised
Ensure the Pressure Release Valve is open, the Steam Release Switch
is in the Open position, and you have let go of the Steam Release Switch.
CAUTION:
Hot steam may be released during this process.
DO NOT
FORCE THE UNIT OPEN
. Do not place face, hands, or body near valve
opening.
Air escapes from the
rim of the Pressure Lid
and pressure will not
increase
Pressure Lid incorrectly installed
See
ATTACHING LID
in
INSTRUCTIONS FOR PRESSURE COOKING
,
p. 20.
Inner Lid not installed
Install Inner Lid (see
INNER LID ASSEMBLY
in
INSTRUCTIONS FOR
PRESSURE LID ASSEMBLY
, p. 16).
Inner Lid Rubber Gasket not installed or
incorrectly installed
Install Inner Lid Rubber Gasket.
Food residue on Inner Lid Rubber Gasket
Clean Inner Lid Rubber Gasket.
Inner Lid Rubber Gasket is damaged
or worn out
Replace Inner Lid Rubber Gasket. Contact Customer Service (see the
back of the manual for contact information). for replacement parts.
Air escapes from Float
Valve during operation
Food stuck on Float Valve Rubber Gasket
Clean Float Valve Rubber Gasket
Inner Lid not installed
Install Inner Lid
Float Valve does
not rise
Float Valve Rubber Gasket is worn out
Replace Float Valve Rubber Gasket. Contact Customer Service
for assistance (see the back of the manual for contact information).
Appliance is not filled with enough food
or water
Check recipe for proper quantities of solids and liquids.
Air is escaping from rim of Lid and/or
from Pressure Release Valve
Contact Customer Service for assistance (see the back of the manual
for contact information).
Float Valve not assembled correctly
Float Valve should be able to move up and down, stopping only when
its Rubber Gasket meets the Lid interior. Ensure that its Rubber Gasket
is clean and the Float Valve can move freely.*
Liquid spitting out of
Float Valve
Too much liquid in Unit
Allow the cooking cycle to finish. Clean the Float Valve thoroughly. Use
less liquid in future recipes.
Unit turns off
unexpectedly
Appliance is overheated
Unplug and let the Unit cool for 30 mins. in order to reset.
CONTINUED ON NEXT PAGE