OSD implementation - DVD
To implement DVD OSD menu, installer must install DVD system on AV1 and connect “DVD IR” cable among navigation cables with
remote sensor cable of DVD.
2.4 OSD implementation
First of all, if you touch the screen on mode ”AV1”,
you can see the menu as shown left. And then if
you do NOT touch anything on the screen 5
seconds or more long; or if you touch the screen
except the menu, the menu will disappear.
At that time, if you choose “INPUT
”
, you can get o
ut of the menu and see the mode change men
u.(left picture)
Here is a picture of the mode change menu. If
you select the channel which you want, then the
channel will be changed to that.(right picture)
>
>>>
As shown above, if you touch the screen on mode ”AV2”, you
can see the menu as shown left. And then if you do NOT touch
anything on the screen 5 seconds or more long; or if you touch
the screen except the menu, the menu will disappear.(left
picture)
Here is a picture of the mode change menu. If you select the
channel which you want, then the channel will be changed to
that.(right picture)
OSD implementation - CMMB, NAVI
DVD, DTV, navigation menu is available in English or Chinese. After implementing OSD menu with pushing “MENU” button on remote
control, choose the language that you want to use.
Emerald Integrations
www.emeraldintegrations.com
