background image

11.Turn  the  knob  (H)  in  anticlockwise  and  start  blending  the  food,  every 
blending  operation  take  10  seconds.  Repeat  this  process  several  times  until 
the  food  reaches  the  desired  consistency,  suggested  cycle  for  warm  food  5 
cycles, suggested cycle for raw food 3 cycle. 
12.Warning: wait 10 seconds between one blending and another. 
 
CLEANING AND MAINTENANCE 
Warning!! 
Before  performing  the  following  cleaning/  maintenance  operations,  always 
switch off the appliance, unplug the power cable (G) from the socket and allow 
the unit to completely cool, including the jar (C) and the steam chamber. 
 
DAILY CLEANING 

Cleaning the jar and the accessories 

The jar (C)  and the kitchen accessories (cap and  basket) can be washed by 
hand  using  a  normal  washing  up  liquid  (do  not  use  abrasive  or  descaling 
product) 
It is advisable to remove the blade group (D) before washing the jar (C) 

Cleaning the water tank 

To  clean  the  tank  be  sure  the  product  is  cold  and  unplugged  then  it  can  be 
clean with soap and water and rinsed thoroughly. Do not use harsh cleaning 
agents such as bleach or one contain chlorine or its compounds 
If lime scale deposit form, fill the tank with a solution of equal parts of cold  tap 
water  and  white  vinegar,  leave  for  at  least  10  hours  then  rinse  thoroughly 
using cold tap water only. 

Cleaning the blade group 

To prevent/reduce the risk of oxidation and corrosion of the blades, the blade 
group  must  be  cleaned  and  dried  after  every  use.  Remove  the  blade  group 
from  the  jar  and  clean  it  with  soap  and  water,  do  not  use  harsh  detergents 
such as bleach. 
Warnings: Do not wash the blade group in the dishwasher. 
 
 
 
 
 
 
 
 

Summary of Contents for FP050









Reviews: