Emec LOTUS MINI, Operation Manual

Page: 52 / 72

20
6.4 Status Displays
Push the click-wheel on “Status” to open 4 different operation displays:
Check: The signal lights are showing the function of the dosing controls.
At stagnant production the signal light shows .
During production the signal lights from the dosing controls
“Check” are blinking inverse
corresponding to the signals from the „Pump“ .
That means: in the moment when a pump is doing a stroke
(light = ), the light of the dosing control has to show .
Pump: See also „Check“ .
Mode: Shows the activated operation mode.
Production: Shows the actual chlorine dioxide production capacity.
Water Meter: Shows the actual flow capacity of the contact water meter.
Next Service: Shows the remaining time until the next service is required.
Operating hours: Shows the operating hours counter.
In the operation displays you have different options:
ON/OFF Start/Stop LOTUS
STAND-BY Switches LOTUS into the “Stand-by” mode,
independent to the function of the “Stand-by” – Input
PRIMING Opens the display for dosing pumps priming resp. for manual mode
ESC Go back to the main display
< or > Scroll in the operation displays
Status LOTUS
Production [g/h] : 4.25 Mode:
Water Meter [m ³ /h]: 42.5 Proportional
< ESC >
On
Totalizer
Acid [ltr.] : 9123.5 Mode:
Chlorite [ltr.]: 9124.9 Proportional
Water Meter [m ³ ]: 99999.9
< ESC
On
Status LOTUS
Next Service in [h]: 4375 Mode:
Operating hours [h]: 9999999 Proportional
< ESC >
On
02-12-10 EMEC 09:10:55
LOTUS
25.9° C
Chlorine Dioxide Generator
Stand-by
Status Menu Logbook Help Status
Status LOTUS
Check : Mode:
Pump : Proportional
Acid Water Chlorite
ON Stand-by Priming ESC >