26
Section 2. Delivering Saizen
®
[somatropin (rDNA origin) for injection]
with easypod
™
Giving your daily injection in three steps
Step 1: Attach the needle
A.
Remove the sterility seal from a new
Serofine
™
needle cap
(26a)
.
WARNING:
Do not use the needle if the
sterility seal is damaged or lifting. Make
sure to completely remove the sterility seal.
B.
Insert the needle cap into the needle cavity on
easypod until it locks into place
(26b)
. When
inserted correctly, the needle cap clicks into
place and easypod will beep once.
IMPORTANT:
Do not continue to hold the needle
cap while easypod attaches the needle.
When the needle is attached, the display will
read “Needle attached Remove empty cap”
(26c)
and easypod will beep twice.
Note:
If the needle is not attached correctly, a
warning message “Check needle”
(26d)
will be
displayed. Follow the prompts to safely detach
the needle and replace with a new needle.
C.
Remove the needle cap by pushing the cap sideways
(26e)
.
Note:
Do not throw the needle cap away. You will need
it to detach the used needle after your injection.
Stop
Needle
attached
Remove
empty cap
Dose: 1.5 mg
6
Days
26a
26b
26c
26e
Warning
OK
Check needle
!
26d