HBS Operating Instructions
Version 1.0
Page 26 of 36
Hint:
No external voltage must be connected to the input of the
HBS
because the
charging system would be activated. The storage mode then can not be activated
or will be interrupted.
The charging state of the receiver battery must be >= 70% otherwise the
Storage-Mode can not be activated.
Depending on the capacity of the connected battery it can take several
hours to reach this state. When the correct cell voltage is reached the
HBS
turns itself off.
Hint:
Of course, the battery is balanced during active Storage-Mode, i.e. both cells
remain identical voltages.
An activated Storage-Mode can be manually deactivated by either
pressing the button "Test" for 5 seconds, connecting an external
voltage to the
HBS
(Input) or by disconnecting the battery from Output.
Recommendation:
If it is to foresee that the receiver battery is not to be used for approx. 8 weeks,
the Storage-Mode should be activated already.
Summary of Contents for PowerCube HBS
Page 1: ......
Page 2: ...HBS Operating Instructions Version 1 0 Page 2 of 36...
