DPSI Ampere Operating Instructions
Version 1.0
Page 18 of 28
Hint:
If the DPSI Ampere buzzes for 3 seconds after power on, only one battery is
connected and the DPSI Ampere starts programming mode. If no reprogramming
is desired, turn the DPSI off or wait for approx. 40 seconds, then connect the
second battery.
Hint:
If the DPSI Ampere starts indicating error codes after a short time, although the
batteries are fully charged, possibly a wrong battery type is programmed.
Perhaps a battery is in usage which has a too high internal resistance and which
breaks down under high loads (e.g. NiMH batteries of "AA" size). Therefore only
use batteries suitable for high current load!
