Installing a 2U DAE in a Telco rack
EMC VNXe™3300 System Hardware Installation Guide for Telco Racks
17
Installing a 2U DAE in a Telco rack
This section describes the components of the 2U DAE (DAE5S) mounting kit. It also
describes how to install the mounting kit in a Telco rack and how to install the 2U DAE in
the mounting kit.
2U DAE mounting kit (FRAME-T25DAE/T25DAES)
The following table lists and describes the components in the 2U DAE mounting kit listed
in the table on
. Illustrations of the components can be found in
. The
quantity listed below is per enclosure.
Figure 13 2U DAE mounting kit components
Component
Quantit
y
Use
Front 2U support tray
1
Attaches to the front of the Telco rack
Rear 2U support tray
1
Attaches to the rear of the Telco rack
Rear fastening bracket (left and
right)
2
Attaches to the rear corner of the DAE enclosure and rear tray
#10-32 x .5 in. screw
20
6 to secure front tray to the Telco rack
6 to secure rear tray to the Telco rack
4 to secure the DAE to the front tray
4 to secure the rear fastening brackets to the rear corners of the
DAE
CL4815
(2)
