Figure 21 Sliding server out of the cabinet to the locked position
CL4970
3. Slide the blue disconnect tabs forward to release the inner rails from the slide rails
).
Once you release the server from the inner rails, you must support the full weight of
the server.
4. Being prepared to support the full weight of the server, slowly pull the server forward
and remove it from the cabinet (
).
Figure 22 Releasing the inner rail locks and removing the server from the cabinet
CL4971
Removing the inner rails from the server
Use the procedure that follows to remove each inner rail from the server. Refer to
while performing the procedure.
22
EMC SVR-I1U-1208 Server Installation and Maintenance Guide
