Procedure
1. On the middle of the inner rail, push in and hold the metal latch, and push the rail
backward to release the connection studs from the small end of the rail notches.
2. When the connections studs are in the large end of the rail notches, release the metal
latch and pull the inner rail away from the server.
Figure 23 Releasing the inner rails from the server
CL4972
1
2
Unpacking a part
Procedure
1. Attach an ESD wristband to your wrist and the enclosure in which you are installing
the part.
2. Unpack the part and place it on a static-free surface.
3. If the part is a replacement for a faulted part, save the packing material to return the
faulted part.
Attaching the inner rails to the server
Attach an inner rail to each side of the server by performing the procedure that follows for
each rail. Refer to
while performing the procedure.
Unpacking a part
23