Verifying the mounting kit parts
Verify that the server mounting kit includes the parts listed in table that follows.
Table 5 Mounting kit parts
Component
Use
-
-
2 universal rail assemblies
(consists of slide rails for connection to the
cabinet and inner rails for connection to
server)
Attach back to front on either side between
cabinet channels
Four Phillips pan-head 8-32 x 0.35 in screws
Stabilize the server and rail mounting
1U bezel (application specific)
CL4887
Covers front of server in cabinet
You need a # 2 Phillips-head screwdriver to complete the installation of the rails and
server.
Adjusting the rail assemblies for the cabinet channel holes
The rail assemblies ship with round alignment posts at the end of the rails for cabinet
channels (NEMA rails) with round holes. If your cabinet has channels with square holes,
switch the rail alignment posts to square posts.
Verifying the mounting kit parts
5
