EMC SVR-I1U-1208, Installation And Maintenance Manual

Page: 11 / 30

Figure 7 Correct location for ball bearing retainer assembly
CL5092
2. From the front of the cabinet, align the inner rails attached to the server with the white
plastic guide block on the front inside of each slide rail ( Figure 8 on page 11 ).
For clarity Figure 8 on page 11 shows the inner rail without the server attached.
Figure 8 Aligning the inner rail with white plastic guide block
CL5093
3. Slide the server into the cabinet so the inner rails extends over the plastic guide
blocks and the first part of the ball bearing retainer assemblies ( Figure 9 on page
12 ).
For clarity Figure 9 on page 12 shows the inner rail without the server attached.
Installing the server on the rails in the cabinet
11