Overview
The storage system uses a variety of security features to control user and network
access, monitor system access and use, and support the transmission of storage data.
This document describes available security features.
This document is intended for administrators responsible for storage system
configuration and operation.
The guide approaches security settings within the categories shown in
Table 1
on
page 8:
Table 1 Security settings categories
Security category
Description
Access control
Limiting access by end-user or by other entities to protect
hardware, software, or specific product features.
Logs
Managing the logging of events.
Communication
security
Securing product network communications.
Data security
Providing protection for product data.
Serviceability
Maintaining control of product service operations performed by the
manufacturer or its service partners.
Alert system
Managing the alerts and notifications generated for security-related
events.
Other security settings
Security settings that do not fall in one of the previous sections,
such as physical security.
Related features and functionality information
Specific information related to the features and functionality described in this
document is included in the following for Unity:
l
Unisphere Command Line Interface User Guide
l
Unisphere Online Help
l
SMI-S Provider Programmer's Guide
l
Service Commands Technical Notes
l
Secure Remote Services Requirements and Configuration
The complete set of EMC customer publications is available on the EMC Online
Support website at
http://Support.EMC.com
. After logging in to the website, click
the Support by Product page, to locate information for the specific feature required.
Introduction
8
EMC Unity All Flash, EMC Unity Hybrid, EMC UnityVSA
4.0
Security Configuration Guide
